Vibration Sensors

Sensor for measuring of Vibration (and Acceleration)

  • Repeatability upt to ±0,005% (on 1 Hz) of measuring range
  • Resolutions up to ±0,02% von (0 ... 400 Hz bandwith) of measuring range
  • Temperature dependency (SE) up to ±0,01%/°C
  • No resonance frequency disturbence / effect because of mechanical and electronics band-pass filtering
  • No overshoting becaus of gas damping in Sensing Element (SE)
  • Gas damping combined with electronic filtering avoid or simplifiy external Filter System
  • metal housing e.g.10x25x35mm (HxWxL)
  • cable 1m PVC (other versions possible)
  • Working range: -30°....+85°C (125°C optionally)
  • powering 7…36V regulated / stabilized (avoid power noise)
  • ranges ± 0,25… ± 12g
  • frequency response 0…50 Hz 3db bis 0….1000 Hz 3db
  • one and two axis versions

With this very economique Vibration are now very accurate Vibration measuring and control possible. Without expensive external filtering are measuring without resonance effects and overshooting errors possible.

Additionally there are no expensive adapters and amplifiers necessary. With normal SPS with TRUE RMS output or normal Oscilloscopes are rapid and accurate Vibration control and measuring possible.

KAS903-01A two axis Accelerometer (±12g, X- and Y-axis, 0…400 Hz 3dB bandwith)

KAS903-02A two axis Accelerometer (±12g, X- and Y-axis, 0…1000 Hz 3dB bandwith)

KAS903-11A two axis Accelerometer (±12g, X- and Y-axis, 0…400 Hz 3dB bandwith)

KAS903-12A two axis Accelerometer (±12g, X- and Y-axis, 0…1000 Hz 3dB bandwith)

KAS901-58 two axis accelerometer (±4g, X- and Y-axis, 0…415 Hz 3dB bandwith)

KAS901-54 two axis accelerometer (±1,7g, X- and Y-axis,
0…50 Hz 3dB bandwith)

KAS901-55 two axis accelerometer (±1,7g, X- and Z-axis,
0…50 Hz 3dB bandwith)