Acceleration Sensors

Rugged sensors for measuring of Acceleration and Vibration

  • Repeatability more then ±0,1%
  • Resolution up to ±0,01%
  • Temperature dependency SE ±0,01%/°C
  • No overshooting and resonance frequencies disturbances
  • Metal housings e.g.10x25x35mm (HxBxL)
  • Cable 1m PVC (other versions possible)
  • Working range: -30°....+85°C (125°C optionally)
  • powering 7…36V regulated (no powering noise)
  • Ranges ± 0,25… ± 12g
  • Band-pass frequency response from 0…50 Hz 3db up to 0….1000 Hz 3db
  • One and two-axis sensors available

IP67(68) metal housing for harsh environment with common M12 sensor-connector

KAS804-Serie für hohe Temperaturen bis 100 oder 125°C

Analogue Accelerometer with IP64 housing, cable and 0.5...4.5 V output:

KAS901-04 one axis accelerometer (±1,7g, X-axis and 0,1mg resolution)

KAS901-05 one axis accelerometer (±1,7g, Z-axis and 0,15mg resolution)

KAS901-54 two axis accelerometer (±1,7g, X- and Y-axis and 0,1mg resolution)

KAS901-55 two axis accelerometer (±1,7g, X- and Z-axis and 0,1mg resolution)

KAS901-58 two axis accelerometer (±4g, X- and Y-axis and 0,2mg resolution)

KAS903-xx two axis accelerometer (±12g, X- and Y-axis and 0.2mg resolution)

Analogue Accelerometer with IP67 (68) housing and 4...20mA output:

(also 1...5V and 2-10V output available)

SCA1x4T 1-axis Accelerometer (±1,7g, X-axis and 0,2mg resolution)

SCA1x4T 1-axis Accelerometer (±2,7g, X-axis and 400 Hz 3db damping)

For small series only (e.g. 5pcs) please contact us.

 

Other ranges and measuring axis are available on request.